EVO PRO Remote Control Pairing Setup
- Ensure working batteries are in the remote.
- Power on the EVO PRO 4K set-top box.
- Launch the EVO PRO 4K remote setup screen by using a pin or paperclip to press in the small “recovery” hole on the bottom of the set-top box (pictured below) and hold for 5 seconds.
- Follow the prompts on the screen. Press and hold the Back
and Home
buttons simultaneously until the LED on the top of the remote blinks. Then place the remote on top of the set-top box.
- Once the “success” stage is completed, you will be able to use the remote.
See also: